Anti-Static Cast Hand Stretch Film
- Material: LLDPE cast film with anti-static additive
- Thickness: 15-35 um typical
- Width: 250 mm, 450 mm, 500 mm
- Roll Length: 200-500 m hand roll
- Color: Transparent or light pink identification tint
- Core: 2 inch or 3 inch paper core
Pro Pack Tape Company is a manufacturer of anti-static cast hand stretch film for ESD-sensitive packaging, electronic component handling, and dust-sensitive production areas. Made from LLDPE cast film with an anti-static additive, this hand wrap helps reduce static charge build-up during roll unwinding, manual wrapping, film contact, and removal. Its smooth cast structure gives stable release, flat contact, and clear visibility for PCB cartons, connector boxes, ESD labels, and precision part identification.
Product Overview
Anti-static cast hand stretch film is made for manual wrapping where static control is more important than basic load holding. In electronic packaging areas, ordinary hand film can create unwanted charge during fast unwinding, rubbing contact, film-to-film contact, or later removal. This film is used around PCB packaging, connectors, sensors, microchips, instruments, electronic assemblies, and precision parts affected by electrostatic discharge or dust attraction.
This cast hand stretch film wrap has a flat cast surface and smooth release, so operators can wrap cartons, trays, connector boxes, and component packs without heavy noise, rough unwinding, or sudden pulling. Common specifications include 15-35 um thickness, 250 mm, 450 mm, and 500 mm widths, and 200-500 m hand roll lengths.
As an ESD stretch film for electronics, clarity is also important. Operators can still read ESD warning marks, barcode labels, part numbers, and connector codes after wrapping. Transparent or light pink tint helps identify anti-static packaging while keeping contents visible. If surface resistance is required, testing should be confirmed under agreed conditions. A range such as 10^9-10^11 ohm/sq should only be used when supported by test results.
Benefits
– Helps reduce static charge build-up during unwinding, wrapping, film contact, and removal.
– Supports ESD packaging for PCB, connectors, precision parts, and electronic assemblies.
– Clear cast film keeps labels, ESD marks, part numbers, and inspection information readable.
– Smooth unwinding helps operators apply steadier tension with less sudden pulling.
– Flat film contact works well around small cartons, trays, and component boxes.
– Helps reduce dust attraction in dry rooms, low-humidity areas, and plastic-contact environments.
How Should Anti-Static Performance Be Checked Before Wrapping Electronics?
Before using anti-static hand stretch film around electronic components, packaging teams should check more than roll size and thickness. The film should match product sensitivity, room humidity, and friction created during handling. Dry air, fast unwinding, plastic trays, foam inserts, repeated rubbing, and aggressive pulling can all increase charge generation.
If surface resistance data is needed for PCB, connectors, sensors, or precision parts, it should be checked according to the required ESD packaging control level. Film color helps identification, but documented anti-static performance is more important when a specific range is required.
TDS
Item | Typical Value |
Product Type | Anti-static cast hand stretch film |
Film Structure | LLDPE cast film with anti-static additive |
Application Method | Manual wrapping by hand roll or hand dispenser |
Thickness | 15-35 um typical |
Common Width | 250 mm, 450 mm, 500 mm |
Roll Length | 200-500 m depending on thickness and roll weight |
Core Size | 2 inch or 3 inch paper core |
Color Option | Transparent or light pink identification tint |
Anti-Static Performance | Confirmed by test condition when required |
Surface Resistance Reference | 10^9-10^11 ohm/sq only when test-confirmed |
Suggested Use Area | ESD packaging, electronics storage, precision part wrapping |
Applications
– PCB carton wrapping where labels and inspection marks must remain visible.
– Connector boxes, sensor trays, microchip packs, and precision component packaging.
– Electronic assembly storage in dry or dust-sensitive production areas.
– Manual wrapping near ESD Protected Areas where friction and charge build-up need attention.
– ESD-sensitive work-in-process packaging between assembly, testing, inspection, and storage.
– Component transfer between production, inspection, and controlled storage areas.
What Makes Cast Hand Film Suitable for ESD-Sensitive Manual Packaging?
Cast film is often preferred because it releases smoothly, stays flatter on the package, and gives better visual clarity than rougher hand films. In electronics handling, uneven release or hard pulling can add friction around plastic surfaces, trays, and sensitive components.
A well-made anti-static stretch wrap film helps operators apply steadier tension while keeping the surface easy to inspect. Labels, connector codes, ESD warning signs, barcode information, and quality-control marks can be checked without cutting open the wrap. Compared with ordinary hand stretch film, ESD hand stretch wrap is selected for static control, dust reduction, and safer handling around static-sensitive goods.
FAQ
Is this film the same as ordinary clear hand film?
No. Ordinary hand film focuses on wrapping and holding. This film uses an anti-static formulation to help reduce charge build-up around sensitive electronics.
Can surface resistance be confirmed only by film color?
No. Color helps identification, but surface resistance or anti-static performance should be confirmed by testing when a defined range is required.
What products are suitable for this film?
PCB, circuit boards, connectors, sensors, microchips, precision parts, electronic assemblies, and dust-sensitive components that need manual ESD packaging.
What should be checked before use in dry environments?
Keep the area clean, avoid aggressive roll pulling, check low humidity, and confirm whether documented anti-static performance is required.
