No products were found matching your selection.
Other Related Products
-
The masking tape temperature range must be read together with tape construction, exposure duration, actual surface temperature and removal condition. This technical reference explains how backing, adhesive, thickness, peel adhesion, holding power and mechanical properties affect short heat-cycle testing. It applies to paper- and film-backed masking tapes used on painted, coated, metal, glass and plastic surfaces. Typical or project-confirmed values should be verified through sample testing under the intended process conditions.
-
- Material: Kraft paper backing
- Adhesive: Starch/gum adhesive
- Color: Natural kraft or white
- Width: 48 mm, 60 mm, 70 mm, 72 mm
- Length: 50 m, 100 m, 137 m, 183 m
- Type: Plain or reinforced
-
- Material: LLDPE cast film
- Color: clear transparent
- Common width: 450-500 mm
- Thickness: 15-25 um
- Roll length: 200-500 m
- Core: 2 inch or 3 inch paper core
-
- Common size: 18mm, 24mm, 36mm, 48mm x 50m
- Backing: saturated crepe paper
- Adhesive: rubber-based pressure-sensitive adhesive
- Color: yellow, green, beige, or custom color
- Use: auto body spraying and refinishing masking
- Supply: standard rolls and custom slit widths
-
- Material: high-tenacity polyester fiber cord
- Widths: 13mm, 16mm, 19mm, 25mm, 32mm
- Strength: approx. 300kgf-1500kgf linear breaking strength
- System strength: approx. 450kgf-2600kgf with matched wire buckle
- Roll length: approx. 250m-1100m by width and grade
- Fastening: galvanized or phosphated wire buckle with manual tensioner
-
A tape for transit packaging should be selected by carton surface, shipment weight, closure method, handling risk, adhesive behavior, and application conditions. For shock-resistant carton sealing, the tape does not absorb impact like inner cushioning; it helps keep carton flaps closed during lifting, stacking, vibration, drop-style handling, and route changes. The main risks are edge lifting, end flagging, center-seam opening, poor wet-out on recycled board, and seal loss after temperature or humidity exposure. A safer choice should be confirmed through surface checks, application pressure control, 24-hour observation, and carton-level handling trials before full use.
-
- Size: 24mm, 36mm, 48mm, 50mm, 60mm, and 72mm.
- Color: Natural brown, white, or printed kraft paper.
- Material: 60-90 gsm kraft paper backing.
- Adhesive: Hot melt or natural rubber.
- Use: Clean, dry, light to medium cartons.
- Supply: 50m, 100m, custom widths, and printed rolls.
-
- Width: 48mm / approx. 2 inch
- Length: 50m / 55m
- Color: Green
- Backing: Crepe paper / saturated crepe paper
- Adhesive: Rubber-based pressure-sensitive adhesive
- Core: 3 inch paper core
-
- Common sizes: 48mm, 50mm, 60mm, and custom slit widths
- Color: super clear transparent for labels and printed cartons
- Material: BOPP film backing with pressure sensitive adhesive
- Adhesive options: water based acrylic, hot melt, or solvent adhesive
- Thickness: 45-60um typical factory range for box closure
- Supply form: finished rolls or jumbo rolls with 76mm paper core
