No products were found matching your selection.
Other Related Products
-
- Material: PE / LLDPE cast stretch film
- Thickness: 8-35 um, common 17/20/23 um
- Width: 250-1000 mm, common 500 mm
- Roll weight: 25-55 kg, common 40/45/50 kg
- Core: 76 mm / 3 inch paper core
- Use: slitting and rewinding production
-
- Common Size: 12mm-100mm width, 20m-50m length
- Color: Clean white paper surface
- Backing: Writable crepe paper
- Adhesive: Balanced pressure-sensitive adhesive
- Use Type: Indoor labeling, masking, and temporary holding
- Feature: Hand tear, easy marking, cleaner removal
-
- Material:OPP/BOPP film
- Adhesive:Water-based acrylic
- Width:1280mm, 1620mm
- Length:4000m typical
- Thickness:38um-65um
- Use:Slitting and rewinding
-
- Size: 24mm, 36mm, 48mm, 50mm, 60mm, and 72mm.
- Color: Natural brown, white, or printed kraft paper.
- Material: 60-90 gsm kraft paper backing.
- Adhesive: Hot melt or natural rubber.
- Use: Clean, dry, light to medium cartons.
- Supply: 50m, 100m, custom widths, and printed rolls.
-
- Material: Kraft paper backing
- Adhesive: Starch/gum adhesive
- Color: Natural kraft or white
- Width: 48 mm, 60 mm, 70 mm, 72 mm
- Length: 50 m, 100 m, 137 m, 183 m
- Type: Plain or reinforced
-
- Material: crepe paper backing with rubber pressure-sensitive adhesive
- Width: 990mm, 1020mm, 1250mm, 1260mm usable options
- Length: 1500m, 1800m, or 2000m per jumbo roll
- Colors: natural, white, yellow, beige, red, blue, green, black
- Thickness: 125um-150um typical factory test range
- Use: raw roll supply for finished masking tape conversion
-
The masking tape temperature range must be read together with tape construction, exposure duration, actual surface temperature and removal condition. This technical reference explains how backing, adhesive, thickness, peel adhesion, holding power and mechanical properties affect short heat-cycle testing. It applies to paper- and film-backed masking tapes used on painted, coated, metal, glass and plastic surfaces. Typical or project-confirmed values should be verified through sample testing under the intended process conditions.
-
A tape for transit packaging should be selected by carton surface, shipment weight, closure method, handling risk, adhesive behavior, and application conditions. For shock-resistant carton sealing, the tape does not absorb impact like inner cushioning; it helps keep carton flaps closed during lifting, stacking, vibration, drop-style handling, and route changes. The main risks are edge lifting, end flagging, center-seam opening, poor wet-out on recycled board, and seal loss after temperature or humidity exposure. A safer choice should be confirmed through surface checks, application pressure control, 24-hour observation, and carton-level handling trials before full use.
-
- Material: Corona-treated BOPP film
- Adhesive: Water-based acrylic or hot melt adhesive
- Printing: Surface printing or reverse printing
- Common Thickness: 40 um, 45 um, 50 um, 55 um
- Common Widths: 24 mm, 36 mm, 48 mm, 60 mm, 72 mm
- Colors: Clear, brown, white, red, blue, yellow, or custom film color
