No products were found matching your selection.
Other Related Products
-
- Material: colored crepe paper backing
- Adhesive: rubber pressure-sensitive adhesive
- Common widths: 12 mm, 18 mm, 24 mm, 36 mm, 48 mm
- Colors: yellow, red, blue, green, white, black, orange, custom colors
- Thickness: typically 0.11-0.14 mm
- Use: color coding, temporary bundling, short-term holding, light masking
-
- Material:OPP/BOPP film
- Adhesive:Water-based acrylic
- Width:1280mm, 1620mm
- Length:4000m typical
- Thickness:38um-65um
- Use:Slitting and rewinding
-
- Jumbo width: 1020 mm, 1040 mm, 1090 mm, or specified width
- Color: natural brown or white
- Backing: 65-110 g/m2 kraft paper
- Adhesive: water activated starch adhesive
- Structure: reinforced or non-reinforced
- Thickness: 0.11-0.17 mm typical
-
- Backing: Transparent BOPP film
- Adhesive: Water-based acrylic PSA
- Core: 3 inch paper core option
- Widths: 36-72 mm common range
- Lengths: Finished rolls and machine rolls
- Use: Corrugated carton sealing
-
- Common size: 48mm, 50mm, 72mm width; 50m, 66m, 100m, 1000m length
- Color: Clear standard; tan option available
- Backing: 25-28 um clear BOPP film
- Adhesive: Solvent based acrylic PSA, 18-23 g/m2 coat weight reference
- Thickness: 45-55 um typical factory test range
- Use: Medium duty carton sealing, warehouse packing, export cartons
-
- Material: LLDPE or multi-layer PE stretch film
- Color: opaque black with consistent masterbatch dispersion
- Thickness: 15-35 um, commonly 20 um, 23 um, or 25 um
- Width: 450 mm and 500 mm common pallet sizes
- Roll type: black hand pallet wrap, black machine stretch film, or custom roll
- Use: load concealment, pallet identification, and privacy packaging
-
- Material:Crystal clear BOPP film
- Adhesive:Water-based acrylic adhesive
- Color:Transparent / crystal clear
- Width:45mm / 48mm / 50mm / 72mm
- Core:3 inch / 76mm paper core
- Supply:Standard rolls / machine rolls / bulk case supply
-
The masking tape temperature range must be read together with tape construction, exposure duration, actual surface temperature and removal condition. This technical reference explains how backing, adhesive, thickness, peel adhesion, holding power and mechanical properties affect short heat-cycle testing. It applies to paper- and film-backed masking tapes used on painted, coated, metal, glass and plastic surfaces. Typical or project-confirmed values should be verified through sample testing under the intended process conditions.
-
A tape for transit packaging should be selected by carton surface, shipment weight, closure method, handling risk, adhesive behavior, and application conditions. For shock-resistant carton sealing, the tape does not absorb impact like inner cushioning; it helps keep carton flaps closed during lifting, stacking, vibration, drop-style handling, and route changes. The main risks are edge lifting, end flagging, center-seam opening, poor wet-out on recycled board, and seal loss after temperature or humidity exposure. A safer choice should be confirmed through surface checks, application pressure control, 24-hour observation, and carton-level handling trials before full use.
