No products were found matching your selection.
Other Related Products
-
- Size: 48mm, 50mm, and custom slit widths.
- Color: Clear, tan, brown, and reviewed production colors.
- Backing: BOPP film, typically 23-30 um.
- Adhesive: Water-based acrylic pressure-sensitive adhesive.
- Structure: Coated back side for quieter roll release.
- Use: Carton sealing, packing benches, and general packaging.
-
A tape for transit packaging should be selected by carton surface, shipment weight, closure method, handling risk, adhesive behavior, and application conditions. For shock-resistant carton sealing, the tape does not absorb impact like inner cushioning; it helps keep carton flaps closed during lifting, stacking, vibration, drop-style handling, and route changes. The main risks are edge lifting, end flagging, center-seam opening, poor wet-out on recycled board, and seal loss after temperature or humidity exposure. A safer choice should be confirmed through surface checks, application pressure control, 24-hour observation, and carton-level handling trials before full use.
-
- Material: Clear BOPP film backing
- Adhesive: Water-based acrylic adhesive
- Thickness: 35um-60um typical range
- Width: 12mm, 15mm, 18mm, 24mm
- Length: 10m, 20m, 33m, 66m, 100m
- Finish: Clear, crystal clear, colored, easy tear
-
- Jumbo width: 1020 mm, 1040 mm, 1090 mm, or specified width
- Color: natural brown or white
- Backing: 65-110 g/m2 kraft paper
- Adhesive: water activated starch adhesive
- Structure: reinforced or non-reinforced
- Thickness: 0.11-0.17 mm typical
-
- Width: 48mm / approx. 2 inch
- Length: 50m / 55m
- Color: Green
- Backing: Crepe paper / saturated crepe paper
- Adhesive: Rubber-based pressure-sensitive adhesive
- Core: 3 inch paper core
-
- Material: BOPP film with acrylic adhesive
- Color: yellow or transparent yellowish
- Widths: 48 mm, 50 mm, 60 mm, 72 mm
- Thickness: 45-55 um typical
- Core: 3 inch paper core
- Use: parcel sealing and color identification
-
The masking tape temperature range must be read together with tape construction, exposure duration, actual surface temperature and removal condition. This technical reference explains how backing, adhesive, thickness, peel adhesion, holding power and mechanical properties affect short heat-cycle testing. It applies to paper- and film-backed masking tapes used on painted, coated, metal, glass and plastic surfaces. Typical or project-confirmed values should be verified through sample testing under the intended process conditions.
-
- Material: colored crepe paper backing
- Adhesive: rubber pressure-sensitive adhesive
- Common widths: 12 mm, 18 mm, 24 mm, 36 mm, 48 mm
- Colors: yellow, red, blue, green, white, black, orange, custom colors
- Thickness: typically 0.11-0.14 mm
- Use: color coding, temporary bundling, short-term holding, light masking
-
- Material: LLDPE cast film with anti-static additive
- Thickness: 15-35 um typical
- Width: 250 mm, 450 mm, 500 mm
- Roll Length: 200-500 m hand roll
- Color: Transparent or light pink identification tint
- Core: 2 inch or 3 inch paper core
