No products were found matching your selection.
Other Related Products
-
- Material:Crystal clear BOPP film
- Adhesive:Water-based acrylic adhesive
- Color:Transparent / crystal clear
- Width:45mm / 48mm / 50mm / 72mm
- Core:3 inch / 76mm paper core
- Supply:Standard rolls / machine rolls / bulk case supply
-
- Material: Kraft paper backing
- Adhesive: Starch/gum adhesive
- Color: Natural kraft or white
- Width: 48 mm, 60 mm, 70 mm, 72 mm
- Length: 50 m, 100 m, 137 m, 183 m
- Type: Plain or reinforced
-
- Material: LLDPE or multi-layer PE stretch film
- Color: opaque black with consistent masterbatch dispersion
- Thickness: 15-35 um, commonly 20 um, 23 um, or 25 um
- Width: 450 mm and 500 mm common pallet sizes
- Roll type: black hand pallet wrap, black machine stretch film, or custom roll
- Use: load concealment, pallet identification, and privacy packaging
-
- Material: colored crepe paper backing
- Adhesive: rubber pressure-sensitive adhesive
- Common widths: 12 mm, 18 mm, 24 mm, 36 mm, 48 mm
- Colors: yellow, red, blue, green, white, black, orange, custom colors
- Thickness: typically 0.11-0.14 mm
- Use: color coding, temporary bundling, short-term holding, light masking
-
- Material: crepe paper backing with rubber pressure-sensitive adhesive
- Width: 990mm, 1020mm, 1250mm, 1260mm usable options
- Length: 1500m, 1800m, or 2000m per jumbo roll
- Colors: natural, white, yellow, beige, red, blue, green, black
- Thickness: 125um-150um typical factory test range
- Use: raw roll supply for finished masking tape conversion
-
- Material: high-tenacity polyester fiber cord
- Widths: 13mm, 16mm, 19mm, 25mm, 32mm
- Strength: approx. 300kgf-1500kgf linear breaking strength
- System strength: approx. 450kgf-2600kgf with matched wire buckle
- Roll length: approx. 250m-1100m by width and grade
- Fastening: galvanized or phosphated wire buckle with manual tensioner
-
The masking tape temperature range must be read together with tape construction, exposure duration, actual surface temperature and removal condition. This technical reference explains how backing, adhesive, thickness, peel adhesion, holding power and mechanical properties affect short heat-cycle testing. It applies to paper- and film-backed masking tapes used on painted, coated, metal, glass and plastic surfaces. Typical or project-confirmed values should be verified through sample testing under the intended process conditions.
-
- Material: Clear BOPP film backing
- Adhesive: Water-based acrylic adhesive
- Thickness: 35um-60um typical range
- Width: 12mm, 15mm, 18mm, 24mm
- Length: 10m, 20m, 33m, 66m, 100m
- Finish: Clear, crystal clear, colored, easy tear
-
A tape for transit packaging should be selected by carton surface, shipment weight, closure method, handling risk, adhesive behavior, and application conditions. For shock-resistant carton sealing, the tape does not absorb impact like inner cushioning; it helps keep carton flaps closed during lifting, stacking, vibration, drop-style handling, and route changes. The main risks are edge lifting, end flagging, center-seam opening, poor wet-out on recycled board, and seal loss after temperature or humidity exposure. A safer choice should be confirmed through surface checks, application pressure control, 24-hour observation, and carton-level handling trials before full use.
